| G.M. Commercial Kit Boat
Includes:
- All molded fiberglass components (unassembled)
- HULL molded one piece with (4) 2 x 12 stringers
- (3) bulkheads and plywood/glass transom all encased in fiberglass.
- Cabin, foredeck, gunwales molded one piece.
- Windshield, canopy molded one piece, and visor.
All hardware in complete boats available for purchase through General Marine.
Kit Boats available at any stage of completion by quote.
 Pricing starts at $22,999.00.
...........................................
G.M. 26 Full Cabin
Commercial Inboard
Includes:
- Molded hull and cabin components (hand laid-solid glass)
- (4) 2 x 12 longitudinal stringers
- (3) fiberglass bulkheads
- (3) flush cockpit hatches
- custom heavy duty stainless steel cleats
chocks and bow bit
- heavy duty PVC rub rail (stainless thru bolted)
- teak grab rails
- molded in splash rails
- safety plate windows with anodized aluminum frames
(4) port holes with screened openings
- 1 1/2' Aqua Met 22 shafting
- Walters split coupling
- 90 gallon aluminum fuel tank (up to 150 optional)
|
|
- fuel and exhaust hose grade "A" Coast Guard certified
- non-skid foredeck and sole deck
- recessed dashboard, or console dashboard
- Morse controls
- heavy duty cables
- heavy duty sket/rudder
- fiberglass stern tube (wet well optional)
- 19" 4-bladed prop
- hyd. steering
- 12 volt DC electrical panel with 12 breakers (no fuses)
- battery test and dual switch
- navigational lights
- cabin lights
- auto bilge
- rope locker
- wiper and bow eye (wet exhaust std. - dry optional)
|
 Pricing starts at $61,000.00 | For a list of detailed options CLICK HERE
...........................................
G.M. Downeast Cruiser
Includes all specified in Commercial 26 (above) and the following:
- vee bunks with cushions and storage hatches
- Galley: 2 burner alcohol stove, teak cutting board, hand pump faucet, sink, fresh water tank
- teak drawers
- porti potti (manual head available)
- full teak trim package
- teak companionway door
- stainless steel rub rail trim
|
|
- boot top stripe (red)
- vinly ester resin
- cove stripe
- non-skid deck
- self-bailing
- stainless steel handrails optional and any teak may be replaced with fiberglass.
|
 Pricing starts at $75,900.00 | For available options, please CLICK HERE
...........................................
G.M. 26 Downeast Cruiser Sedan
(available in Bass Boat configuration)
Includes all specified in Downeast Cruiser (above) and the following:
2 side panels with 4 windows (2 opening)
enclosed head with a manual head
holding tank with a "Y" valve
pressurized hot and cold water
shower
 Pricing starts at $84,999.00
For available options, please CLICK HERE
...........................................
 VIEW MORE AVAILABLE OPTIONS
ENGINES
Any of the available engines can be added to quotes.
Pricing shown is approximate and subject to change without notice. Deisel:
Nanni (Toyota Block) 200 Diesel $16,100
Nanni (Toyota Block) 320 Diesel $20,300
Yanmar 250 $19,500
Volvo D-4 210 $18,500 Mercruiser 350 Fuel Injected v-8 Gas 300 HP $9,999
TRAILERS:
$6,000
Include: galv., roller, buddie bearing, tandem and tongue jack.
Packages available at any stage of completion.
Options such as side panels, engine insulation, bottom paint, etc will be priced by quote. .........................................
ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
.........................................
PRICING TERMS
10% down secures deal and hull number
20% down additional before construction
30%
30%
10% at completeion of contracted boat
F.O.B. General Mairne, Biddeford, Maine (before launch) |
